Configs may carry a fifth element, the PostgreSQL CPU limit, which goes
into the config key (-pg<CPU>), the budget and the cell stand. Series db:
1, 2, 4 replicas at the tight limit and a 4 x 1 control at 2 CPU; label
summaries show PostgreSQL CPU at R* against its limit and throttling.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Close the 53300 known issue, restate H1 and saturation conclusions
against the pre-registered criteria and grid resolution, name the
unresolved host mechanism, attribute overload 503 to the pool timeout,
and plan a fresh A/A for scaling-improvement.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
plots.py summary gains per-request CPU by component, PostgreSQL waits and
pool, H1b throttling and memory peaks; compare.py and plots.py headers
name the spec, change and host; errors logs match 5xx by status field and
keep the exception tail; series labels record sampler limits.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
SQLSTATE 53300 (too_many_connections) joins UNAVAILABLE_SQLSTATES, so a
refused pool connection gives 503 unavailable instead of 500. New fault
check fills max_connections through the failure stand hook and expects
503 in the contract format.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Series a/b/pool/ab/quick in bench/run.py: per-cell fresh stand with the
configuration's replicas and max_connections, open-model mixed profile
(k6/mixed.js), fixed levels and R* search by SLO, a sampler container
for cgroup, VM, HAProxy and PostgreSQL metrics, resume and a stand
lock. Pure helpers in bench/scaling.py, SVG plots in bench/plots.py,
series mode for bench_compare and bench_ab. Hypotheses H1-H3 go to
REPORT.md before the first series.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Track 1 "cost of scaling": open-model series A (fixed 4 CPU budget),
B (1-6 replicas), pool border (max_connections 100 vs 50) and A/A,
sampler of cgroup/VM/LB/PostgreSQL metrics, generator limits, series
mode for bench_compare and bench_ab. Hypotheses H1-H3 are recorded in
the design before any series run.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Sync the rolling-update delta specs into db-migrations,
graceful-shutdown, load-balancing and load-benchmark, move the change to
the archive, mark it in PLAN.md and update the transitional state and
code map in AGENTS.md.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Re-run the compatibility walk-through, the script failure cases with a
real Ctrl+C through a pseudo-terminal, the stand lifecycle after
replacement and the quick rollout and failover self-checks on 84161c0
with a clean tree; update the report rows and limitations.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
With lock_timeout equal to statement_timeout (5 s) every request queued
behind a migration waiting for its lock failed with 503 together with
the migration. A 2 s lock timeout lets the queue proceed once the
migration gives up.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Reset the new replica ID before entering the starting state and let the
cleanup find a replica created by an interrupted compose scale; refuse
to start while LB slots keep a manual drain or maint state; log the exit
code of each stopped old replica and print full LB commands for manual
cleanup. Document the migrate step and the rollback tag limitation.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
A one-off run --rm left the migrate container of the previous image in
the stand; scripts/restart.sh then started it as a dependency of api and
the old migrations failed on the newer schema, so test-persistence broke.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Old image passes smoke and student tests on the new schema, rolling
update, rollback and roll forward under tests/load.py give zero failed
requests; the run_docker known issue is not reproduced and is closed.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
scripts/rolling-update.sh (make rolling_update) replaces API replicas one
by one: build, migrations once, new replica UP in HAProxy, old replica
drained and put into maintenance through the LB runtime API on loopback,
then stopped and removed; the slot is reset once DNS drops the address.
Expand migration adds messages.instance_id with a lock timeout. The bench
rollout profile runs the same script under constant load, starting from
the image of an older commit built with git archive.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Delta specs synced into graceful-shutdown, load-balancing, load-benchmark
and service-configuration; the change moves to
openspec/changes/archive/2026-10-11-graceful-failover/. PLAN.md marks the
change archived and AGENTS.md notes what was handed to rolling-update.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
The verify fix in bench/compare.py refuses a label measured without the
load balancer; the load-benchmark delta now modifies the label comparison
requirement accordingly.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
The rejected LB pool variant is re-measured on committed code with a
temporary second HAProxy differing in http-reuse only: the replica, not
the LB, closed the last idle connection after 60.4 s. Exploratory
never/safe SIGTERM numbers are separated from evidence. hang-key cleanup
is shown under Ctrl+C and SIGTERM, bench_compare refuses a label without
the LB. Drain before SIGTERM and the run_docker recreate issue are handed
to rolling-update in PLAN.md and KNOWN_ISSUES.md; design gains decision 10.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
hang-key names its trigger per run, turns SIGTERM and SIGHUP into an
interrupt so the trigger is always dropped and the replica unpaused, and
prints the cleanup SQL if dropping fails. idle-conns reports who closed
the idle connections and can read the pool of another LB container, so a
variant LB config can be checked against the same replicas. bench_compare
refuses a label measured without the load balancer. Stale numbers removed
from the haproxy.cfg comment.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Failover profile label baseline from 459f84c on a checked host: stop and
kill of each replica under 200 req/s give 0 errors and LB exclusion in
0.79-1.81 s (bound 2.5 s), pause gives LB exclusion in 5.83-6.00 s
(bound 6.5 s) with 504s for half the requests and recovery in 6 s;
reconciliation of retried writes matches. Evidence for detection,
keep-alive (LB closes idle replica connections at 10.1 s) and the hung
replica key lock, regression checks, timeout chain and level 4 rows in
REPORT.md.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
HAProxy checks get fastinter 500ms and timeout check 2.5s (hung replica
detected within 6.5 s), http-reuse never with uvicorn keep-alive 60 s so
the LB closes idle replica connections, and app connections set
idle_in_transaction_session_timeout so a frozen replica releases its
idempotency key. The bench stand runs behind HAProxy with N replicas and
gains the failover profile (make bench_failover / bench_failover_quick):
constant-rate writes with a key and reads while each replica is stopped,
killed or paused, with per-second timeline, detection and recovery time
and write reconciliation. Driver commands idle-conns and hang-key check
the keep-alive and hung-transaction decisions.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Main specs were already in sync with the deltas (sync re-run, no
changes). PLAN.md marks stage 2 archived and points graceful-failover
at the corrected detection formula; AGENTS.md notes what of the timeout
chain is measured so far and the new replicas evidence.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
The stand was recreated from a4ca9ef (make down, make run_docker) and
all evidence of the change was taken again on it: stand, distribution,
LB errors, test-persistence, test-failover for each replica (stop and
kill), stop-one refusals, make test and student_test through the LB,
test_isolated, failure_checks and bench self-checks.
New evidence closes scenarios verify found without proof: a real git
clone on non-default ports, a hung replica (docker pause: DOWN after
7.7 s, in-flight request 504), PostgreSQL outage behind the LB, replica
tests failing against one process, aborted responses via
driver.py kill-inflight. REPORT.md gets the corrected detection
formula, the measured cost of the 1 CPU limit for Argon2id and the new
rows.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
- stop-one.sh: an empty TARGET_INSTANCE_ID now exits 2 in any shell,
as the design states (${VAR:?} gave 1 under bash).
- driver.py kill-inflight: reproducible "aborted response is not
retried" scenario (logins in flight, replica killed via stop-one.sh).
- Detection time of a hung replica is fall x (inter + timeout check) =
8 s, not inter x fall + timeout check = 5 s (docker pause: 7.3 s);
fixed in haproxy.cfg, balancer.md and the design.
- The 1 CPU replica limit is kept on purpose; the compose comment and
the design now say that Argon2id uses more and logins are slower.
- load-balancing spec: API_REPLICAS is read by compose and Makefile.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Evidence from 4e0cc4e: stand ports, limits and per-service env,
X-Instance-Id distribution and scaling, LB-generated errors,
test-persistence through the LB, test-failover for each replica in stop
and kill modes, stop-one refusals, test runs and bench self-checks.
REPORT.md gains the LB architecture, timeout chain, limits, criteria
rows and defence answers. Coverage exclusions for restart now point to
the lab 3 persistence evidence; stale lab 2 pointers go to
KNOWN_ISSUES.md.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Without init-state down HAProxy marked a slot UP as soon as Docker DNS
returned the container address, before uvicorn listened, so requests
after LB restart or scale-up hit a replica that was not ready.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
HAProxy 3.4 is the only published entry point; api runs as
API_REPLICAS replicas without ports, found through Docker DNS and
checked on /health/ready. Retries only on connection failure, LB errors
in the contract error format, resource limits and per-service secrets.
Adds scripts/stop-one.sh, LB-aware restart.sh, make replicas /
instances / lb_stats and replica tests driven by EXPECT_REPLICAS.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
HAProxy as the single entry point, API replicas without published
ports, resource limits and per-service secrets, restart and stop-one
hooks, replica tests in student-tests.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
- evidence for replay, conflict, replay through a new API process and
after restarting API and storages, keys table, key race,
X-Instance-Id in responses and logs, explicit and invalid
instance_id and key TTL, test runs
- stand evidence: make wipe_data leaves the lab 2 volume intact, build
from a fresh git clone passes smoke, bench restore stage sends with
Idempotency-Key
- REPORT.md: X-Instance-Id, idempotency design, IDEMPOTENCY_TTL_SECONDS
mapping, limitations and evidence rows
- tasks.md: mark the change tasks done, add follow-ups from verify
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>