#1 [internal] load local bake definitions
#1 reading from stdin 432B done
#1 DONE 0.0s

#2 [internal] load build definition from Dockerfile
#2 transferring dockerfile: 1.95kB done
#2 DONE 0.0s

#3 [internal] load metadata for ghcr.io/astral-sh/uv:0.9.7@sha256:ba4857bf2a068e9bc0e64eed8563b065908a4cd6bfb66b531a9c424c8e25e142
#3 DONE 0.0s

#4 [internal] load metadata for docker.io/library/python:3.14-slim-trixie@sha256:51dafde81dbdb6ebde285137a295cf18a47ca95234fe388a343719cb97305b3d
#4 DONE 3.0s

#5 [internal] load .dockerignore
#5 transferring context: 196B done
#5 DONE 0.0s

#6 FROM ghcr.io/astral-sh/uv:0.9.7@sha256:ba4857bf2a068e9bc0e64eed8563b065908a4cd6bfb66b531a9c424c8e25e142
#6 resolve ghcr.io/astral-sh/uv:0.9.7@sha256:ba4857bf2a068e9bc0e64eed8563b065908a4cd6bfb66b531a9c424c8e25e142 0.0s done
#6 DONE 0.0s

#7 [builder 1/7] FROM docker.io/library/python:3.14-slim-trixie@sha256:51dafde81dbdb6ebde285137a295cf18a47ca95234fe388a343719cb97305b3d
#7 resolve docker.io/library/python:3.14-slim-trixie@sha256:51dafde81dbdb6ebde285137a295cf18a47ca95234fe388a343719cb97305b3d 0.0s done
#7 CACHED

#8 [internal] load build context
#8 transferring context: 387.94kB 0.0s done
#8 DONE 0.0s

#9 [builder 2/7] COPY --from=ghcr.io/astral-sh/uv:0.9.7@sha256:ba4857bf2a068e9bc0e64eed8563b065908a4cd6bfb66b531a9c424c8e25e142 /uv /usr/local/bin/uv
#9 CACHED

#10 [builder 3/7] WORKDIR /build
#10 CACHED

#11 [builder 4/7] COPY pyproject.toml uv.lock README.md ./
#11 DONE 0.0s

#12 [builder 5/7] RUN uv sync --locked --no-dev --no-install-project --no-editable
#12 0.231 Using CPython 3.14.7 interpreter at: /usr/local/bin/python3
#12 0.232 Creating virtual environment at: /opt/venv
#12 0.252 Resolved 100 packages in 9ms
#12 0.597 Downloading pillow (6.2MiB)
#12 0.597 Downloading aiohttp (1.8MiB)
#12 0.598 Downloading sqlalchemy (3.1MiB)
#12 0.622 Downloading pydantic-core (1.9MiB)
#12 0.622 Downloading uvloop (4.1MiB)
#12 0.622 Downloading asyncpg (3.6MiB)
#12 0.622 Downloading botocore (15.3MiB)
#12 4.418  Downloading aiohttp
#12 4.503  Downloading pydantic-core
#12 4.842  Downloading sqlalchemy
#12 4.894  Downloading asyncpg
#12 4.997  Downloading uvloop
#12 5.185  Downloading pillow
#12 5.735  Downloading botocore
#12 5.735 Prepared 79 packages in 5.47s
#12 5.824 Installed 79 packages in 89ms
#12 6.267 Bytecode compiled 2685 files in 442ms
#12 6.267  + aio-pika==10.2.1
#12 6.267  + aiobotocore==3.10.0
#12 6.267  + aiohappyeyeballs==2.7.1
#12 6.267  + aiohttp==3.14.5
#12 6.267  + aioitertools==0.13.0
#12 6.267  + aiormq==7.2.4
#12 6.267  + aiosignal==1.4.0
#12 6.267  + alembic==1.16.5
#12 6.267  + annotated-doc==0.0.5
#12 6.267  + annotated-types==0.8.0
#12 6.267  + anyio==4.15.1
#12 6.267  + argon2-cffi==25.1.0
#12 6.267  + argon2-cffi-bindings==26.1.0
#12 6.267  + asgiref==3.13.0
#12 6.267  + asyncpg==0.32.0
#12 6.267  + attrs==26.1.0
#12 6.267  + botocore==1.43.117
#12 6.267  + certifi==2026.10.23
#12 6.267  + cffi==2.1.1
#12 6.267  + charset-normalizer==3.5.2
#12 6.267  + click==8.5.0
#12 6.267  + dishka==1.10.1
#12 6.267  + dishka-faststream==0.7.0
#12 6.267  + fast-depends==3.0.10
#12 6.267  + fastapi==0.141.1
#12 6.267  + faststream==0.7.8
#12 6.267  + frozenlist==1.8.0
#12 6.268  + googleapis-common-protos==1.76.0
#12 6.268  + greenlet==3.5.6
#12 6.268  + gunicorn==26.2.0
#12 6.268  + h11==0.16.0
#12 6.268  + httptools==0.8.0
#12 6.268  + idna==3.20
#12 6.268  + jmespath==1.1.0
#12 6.268  + mako==1.4.3
#12 6.268  + markupsafe==3.0.4
#12 6.268  + multidict==7.2.1
#12 6.268  + opentelemetry-api==1.45.1
#12 6.268  + opentelemetry-exporter-http-transport==0.66b1
#12 6.268  + opentelemetry-exporter-otlp-common==0.66b1
#12 6.268  + opentelemetry-exporter-otlp-proto-common==1.45.1
#12 6.268  + opentelemetry-exporter-otlp-proto-http==1.45.1
#12 6.268  + opentelemetry-instrumentation==0.66b1
#12 6.268  + opentelemetry-instrumentation-asgi==0.66b1
#12 6.268  + opentelemetry-instrumentation-asyncpg==0.66b1
#12 6.268  + opentelemetry-instrumentation-fastapi==0.66b1
#12 6.268  + opentelemetry-proto==1.45.1
#12 6.268  + opentelemetry-sdk==1.45.1
#12 6.268  + opentelemetry-semantic-conventions==0.66b1
#12 6.268  + opentelemetry-util-http==0.66b1
#12 6.268  + orjson==3.12.0
#12 6.268  + packaging==26.3
#12 6.268  + pamqp==4.0.1
#12 6.268  + pillow==13.0.0
#12 6.268  + propcache==0.5.4
#12 6.268  + protobuf==7.36.2
#12 6.268  + pycparser==3.12
#12 6.268  + pydantic==2.13.5
#12 6.268  + pydantic-core==2.46.5
#12 6.268  + pydantic-settings==2.15.0
#12 6.268  + python-dateutil==2.9.0.post0
#12 6.268  + python-dotenv==1.2.3
#12 6.268  + pyyaml==6.0.3
#12 6.268  + redis==8.1.0
#12 6.268  + requests==2.34.2
#12 6.268  + six==1.17.0
#12 6.268  + sqlalchemy==2.0.45
#12 6.268  + starlette==1.7.0
#12 6.268  + structlog==26.1.0
#12 6.268  + typing-extensions==4.16.0
#12 6.268  + typing-inspection==0.4.4
#12 6.268  + urllib3==2.8.0
#12 6.268  + uvicorn==0.54.0
#12 6.268  + uvicorn-worker==0.4.0
#12 6.268  + uvloop==0.22.1
#12 6.268  + watchfiles==1.3.0
#12 6.268  + websockets==17.1
#12 6.268  + wrapt==2.5.1
#12 6.268  + yarl==1.25.1
#12 DONE 6.8s

#13 [runtime 2/9] RUN apt-get update && apt-get upgrade -y && apt-get install -y --no-install-recommends haproxy && rm -rf /var/lib/apt/lists/*
#13 0.314 Hit:1 http://deb.debian.org/debian trixie InRelease
#13 0.586 Get:2 http://deb.debian.org/debian trixie-updates InRelease [47.3 kB]
#13 0.747 Get:3 http://deb.debian.org/debian-security trixie-security InRelease [43.4 kB]
#13 ...

#14 [builder 6/7] COPY src ./src
#14 DONE 0.1s

#15 [builder 7/7] RUN uv sync --locked --no-dev --no-editable
#15 0.147 Resolved 100 packages in 0.76ms
#15 0.149    Building mtusi-messenger @ file:///build
#15 2.056       Built mtusi-messenger @ file:///build
#15 2.060 Prepared 1 package in 1.91s
#15 2.065 Installed 1 package in 5ms
#15 2.149 Bytecode compiled 2807 files in 83ms
#15 2.149  + mtusi-messenger==1.7.0 (from file:///build)
#15 DONE 2.2s

#13 [runtime 2/9] RUN apt-get update && apt-get upgrade -y && apt-get install -y --no-install-recommends haproxy && rm -rf /var/lib/apt/lists/*
#13 7.943 Get:4 http://deb.debian.org/debian trixie/main arm64 Packages [9614 kB]
#13 8.084 Get:5 http://deb.debian.org/debian trixie-updates/main arm64 Packages [1108 B]
#13 8.310 Get:6 http://deb.debian.org/debian-security trixie-security/main arm64 Packages [303 kB]
#13 8.538 Fetched 10.0 MB in 8s (1189 kB/s)
#13 8.538 Reading package lists...
#13 8.852 Reading package lists...
#13 9.155 Building dependency tree...
#13 9.232 Reading state information...
#13 9.256 Calculating upgrade...
#13 9.384 The following packages will be upgraded:
#13 9.384   apt ca-certificates libapt-pkg7.0 liblzma5 libpcre2-8-0 libssl3t64 openssl
#13 9.384   openssl-provider-legacy tzdata zlib1g
#13 9.750 10 upgraded, 0 newly installed, 0 to remove and 0 not upgraded.
#13 9.750 Need to get 7977 kB of archives.
#13 9.750 After this operation, 0 B of additional disk space will be used.
#13 9.750 Get:1 http://deb.debian.org/debian-security trixie-security/main arm64 liblzma5 arm64 5.8.1-1+deb13u2 [303 kB]
#13 9.902 Get:2 http://deb.debian.org/debian-security trixie-security/main arm64 openssl-provider-legacy arm64 3.5.7-1~deb13u3 [314 kB]
#13 10.25 Get:3 http://deb.debian.org/debian-security trixie-security/main arm64 zlib1g arm64 1:1.3.dfsg+really1.3.1-1+deb13u1 [85.0 kB]
#13 10.93 Get:4 http://deb.debian.org/debian-security trixie-security/main arm64 libssl3t64 arm64 3.5.7-1~deb13u3 [2770 kB]
#13 11.27 Get:5 http://deb.debian.org/debian-security trixie-security/main arm64 libapt-pkg7.0 arm64 3.0.4 [978 kB]
#13 11.87 Get:6 http://deb.debian.org/debian-security trixie-security/main arm64 apt arm64 3.0.4 [1363 kB]
#13 12.06 Get:7 http://deb.debian.org/debian-security trixie-security/main arm64 libpcre2-8-0 arm64 10.46-1~deb13u3 [263 kB]
#13 12.26 Get:8 http://deb.debian.org/debian trixie-updates/main arm64 tzdata all 2026f-0+deb13u1 [268 kB]
#13 12.53 Get:9 http://deb.debian.org/debian-security trixie-security/main arm64 openssl arm64 3.5.7-1~deb13u3 [1473 kB]
#13 12.75 Get:10 http://deb.debian.org/debian-security trixie-security/main arm64 ca-certificates all 20250419+deb13u1 [161 kB]
#13 12.84 debconf: unable to initialize frontend: Dialog
#13 12.84 debconf: (TERM is not set, so the dialog frontend is not usable.)
#13 12.84 debconf: falling back to frontend: Readline
#13 12.84 debconf: unable to initialize frontend: Readline
#13 12.84 debconf: (Can't locate Term/ReadLine.pm in @INC (you may need to install the Term::ReadLine module) (@INC entries checked: /etc/perl /usr/local/lib/aarch64-linux-gnu/perl/5.40.1 /usr/local/share/perl/5.40.1 /usr/lib/aarch64-linux-gnu/perl5/5.40 /usr/share/perl5 /usr/lib/aarch64-linux-gnu/perl-base /usr/lib/aarch64-linux-gnu/perl/5.40 /usr/share/perl/5.40 /usr/local/lib/site_perl) at /usr/share/perl5/Debconf/FrontEnd/Readline.pm line 8, <STDIN> line 10.)
#13 12.84 debconf: falling back to frontend: Teletype
#13 12.84 debconf: unable to initialize frontend: Teletype
#13 12.84 debconf: (This frontend requires a controlling tty.)
#13 12.84 debconf: falling back to frontend: Noninteractive
#13 13.10 Preconfiguring packages ...
#13 13.29 Fetched 7977 kB in 3s (2370 kB/s)
#13 13.31 (Reading database ... 
(Reading database ... 5%
(Reading database ... 10%
(Reading database ... 15%
(Reading database ... 20%
(Reading database ... 25%
(Reading database ... 30%
(Reading database ... 35%
(Reading database ... 40%
(Reading database ... 45%
(Reading database ... 50%
(Reading database ... 55%
(Reading database ... 60%
(Reading database ... 65%
(Reading database ... 70%
(Reading database ... 75%
(Reading database ... 80%
(Reading database ... 85%
(Reading database ... 90%
(Reading database ... 95%
(Reading database ... 100%
(Reading database ... 5657 files and directories currently installed.)
#13 13.32 Preparing to unpack .../liblzma5_5.8.1-1+deb13u2_arm64.deb ...
#13 13.32 Unpacking liblzma5:arm64 (5.8.1-1+deb13u2) over (5.8.1-1+deb13u1) ...
#13 13.34 Setting up liblzma5:arm64 (5.8.1-1+deb13u2) ...
#13 13.35 (Reading database ... 
(Reading database ... 5%
(Reading database ... 10%
(Reading database ... 15%
(Reading database ... 20%
(Reading database ... 25%
(Reading database ... 30%
(Reading database ... 35%
(Reading database ... 40%
(Reading database ... 45%
(Reading database ... 50%
(Reading database ... 55%
(Reading database ... 60%
(Reading database ... 65%
(Reading database ... 70%
(Reading database ... 75%
(Reading database ... 80%
(Reading database ... 85%
(Reading database ... 90%
(Reading database ... 95%
(Reading database ... 100%
(Reading database ... 5657 files and directories currently installed.)
#13 13.35 Preparing to unpack .../openssl-provider-legacy_3.5.7-1~deb13u3_arm64.deb ...
#13 13.36 Unpacking openssl-provider-legacy (3.5.7-1~deb13u3) over (3.5.7-1~deb13u2) ...
#13 13.37 Setting up openssl-provider-legacy (3.5.7-1~deb13u3) ...
#13 13.38 (Reading database ... 
(Reading database ... 5%
(Reading database ... 10%
(Reading database ... 15%
(Reading database ... 20%
(Reading database ... 25%
(Reading database ... 30%
(Reading database ... 35%
(Reading database ... 40%
(Reading database ... 45%
(Reading database ... 50%
(Reading database ... 55%
(Reading database ... 60%
(Reading database ... 65%
(Reading database ... 70%
(Reading database ... 75%
(Reading database ... 80%
(Reading database ... 85%
(Reading database ... 90%
(Reading database ... 95%
(Reading database ... 100%
(Reading database ... 5657 files and directories currently installed.)
#13 13.38 Preparing to unpack .../zlib1g_1%3a1.3.dfsg+really1.3.1-1+deb13u1_arm64.deb ...
#13 13.39 Unpacking zlib1g:arm64 (1:1.3.dfsg+really1.3.1-1+deb13u1) over (1:1.3.dfsg+really1.3.1-1+b1) ...
#13 13.40 Setting up zlib1g:arm64 (1:1.3.dfsg+really1.3.1-1+deb13u1) ...
#13 13.41 (Reading database ... 
(Reading database ... 5%
(Reading database ... 10%
(Reading database ... 15%
(Reading database ... 20%
(Reading database ... 25%
(Reading database ... 30%
(Reading database ... 35%
(Reading database ... 40%
(Reading database ... 45%
(Reading database ... 50%
(Reading database ... 55%
(Reading database ... 60%
(Reading database ... 65%
(Reading database ... 70%
(Reading database ... 75%
(Reading database ... 80%
(Reading database ... 85%
(Reading database ... 90%
(Reading database ... 95%
(Reading database ... 100%
(Reading database ... 5656 files and directories currently installed.)
#13 13.42 Preparing to unpack .../libssl3t64_3.5.7-1~deb13u3_arm64.deb ...
#13 13.42 Unpacking libssl3t64:arm64 (3.5.7-1~deb13u3) over (3.5.7-1~deb13u2) ...
#13 13.51 Setting up libssl3t64:arm64 (3.5.7-1~deb13u3) ...
#13 13.53 (Reading database ... 
(Reading database ... 5%
(Reading database ... 10%
(Reading database ... 15%
(Reading database ... 20%
(Reading database ... 25%
(Reading database ... 30%
(Reading database ... 35%
(Reading database ... 40%
(Reading database ... 45%
(Reading database ... 50%
(Reading database ... 55%
(Reading database ... 60%
(Reading database ... 65%
(Reading database ... 70%
(Reading database ... 75%
(Reading database ... 80%
(Reading database ... 85%
(Reading database ... 90%
(Reading database ... 95%
(Reading database ... 100%
(Reading database ... 5656 files and directories currently installed.)
#13 13.53 Preparing to unpack .../libapt-pkg7.0_3.0.4_arm64.deb ...
#13 13.53 Unpacking libapt-pkg7.0:arm64 (3.0.4) over (3.0.3) ...
#13 13.58 Setting up libapt-pkg7.0:arm64 (3.0.4) ...
#13 13.59 (Reading database ... 
(Reading database ... 5%
(Reading database ... 10%
(Reading database ... 15%
(Reading database ... 20%
(Reading database ... 25%
(Reading database ... 30%
(Reading database ... 35%
(Reading database ... 40%
(Reading database ... 45%
(Reading database ... 50%
(Reading database ... 55%
(Reading database ... 60%
(Reading database ... 65%
(Reading database ... 70%
(Reading database ... 75%
(Reading database ... 80%
(Reading database ... 85%
(Reading database ... 90%
(Reading database ... 95%
(Reading database ... 100%
(Reading database ... 5656 files and directories currently installed.)
#13 13.60 Preparing to unpack .../archives/apt_3.0.4_arm64.deb ...
#13 13.61 Unpacking apt (3.0.4) over (3.0.3) ...
#13 13.68 Setting up apt (3.0.4) ...
#13 13.78 (Reading database ... 
(Reading database ... 5%
(Reading database ... 10%
(Reading database ... 15%
(Reading database ... 20%
(Reading database ... 25%
(Reading database ... 30%
(Reading database ... 35%
(Reading database ... 40%
(Reading database ... 45%
(Reading database ... 50%
(Reading database ... 55%
(Reading database ... 60%
(Reading database ... 65%
(Reading database ... 70%
(Reading database ... 75%
(Reading database ... 80%
(Reading database ... 85%
(Reading database ... 90%
(Reading database ... 95%
(Reading database ... 100%
(Reading database ... 5656 files and directories currently installed.)
#13 13.78 Preparing to unpack .../libpcre2-8-0_10.46-1~deb13u3_arm64.deb ...
#13 13.79 Unpacking libpcre2-8-0:arm64 (10.46-1~deb13u3) over (10.46-1~deb13u2) ...
#13 13.81 Setting up libpcre2-8-0:arm64 (10.46-1~deb13u3) ...
#13 13.82 (Reading database ... 
(Reading database ... 5%
(Reading database ... 10%
(Reading database ... 15%
(Reading database ... 20%
(Reading database ... 25%
(Reading database ... 30%
(Reading database ... 35%
(Reading database ... 40%
(Reading database ... 45%
(Reading database ... 50%
(Reading database ... 55%
(Reading database ... 60%
(Reading database ... 65%
(Reading database ... 70%
(Reading database ... 75%
(Reading database ... 80%
(Reading database ... 85%
(Reading database ... 90%
(Reading database ... 95%
(Reading database ... 100%
(Reading database ... 5656 files and directories currently installed.)
#13 13.82 Preparing to unpack .../tzdata_2026f-0+deb13u1_all.deb ...
#13 13.83 Unpacking tzdata (2026f-0+deb13u1) over (2026c-0+deb13u1) ...
#13 14.13 Preparing to unpack .../openssl_3.5.7-1~deb13u3_arm64.deb ...
#13 14.13 Unpacking openssl (3.5.7-1~deb13u3) over (3.5.7-1~deb13u2) ...
#13 14.20 Preparing to unpack .../ca-certificates_20250419+deb13u1_all.deb ...
#13 14.20 Unpacking ca-certificates (20250419+deb13u1) over (20250419) ...
#13 14.33 Setting up tzdata (2026f-0+deb13u1) ...
#13 14.35 debconf: unable to initialize frontend: Dialog
#13 14.35 debconf: (TERM is not set, so the dialog frontend is not usable.)
#13 14.35 debconf: falling back to frontend: Readline
#13 14.35 debconf: unable to initialize frontend: Readline
#13 14.35 debconf: (Can't locate Term/ReadLine.pm in @INC (you may need to install the Term::ReadLine module) (@INC entries checked: /etc/perl /usr/local/lib/aarch64-linux-gnu/perl/5.40.1 /usr/local/share/perl/5.40.1 /usr/lib/aarch64-linux-gnu/perl5/5.40 /usr/share/perl5 /usr/lib/aarch64-linux-gnu/perl-base /usr/lib/aarch64-linux-gnu/perl/5.40 /usr/share/perl/5.40 /usr/local/lib/site_perl) at /usr/share/perl5/Debconf/FrontEnd/Readline.pm line 8.)
#13 14.35 debconf: falling back to frontend: Teletype
#13 14.35 debconf: unable to initialize frontend: Teletype
#13 14.35 debconf: (This frontend requires a controlling tty.)
#13 14.35 debconf: falling back to frontend: Noninteractive
#13 14.37 
#13 14.37 Current default time zone: 'Etc/UTC'
#13 14.37 Local time is now:      Fri Nov 13 20:44:00 UTC 2026.
#13 14.37 Universal Time is now:  Fri Nov 13 20:44:00 UTC 2026.
#13 14.37 Run 'dpkg-reconfigure tzdata' if you wish to change it.
#13 14.37 
#13 14.38 Setting up openssl (3.5.7-1~deb13u3) ...
#13 14.38 Setting up ca-certificates (20250419+deb13u1) ...
#13 14.42 debconf: unable to initialize frontend: Dialog
#13 14.42 debconf: (TERM is not set, so the dialog frontend is not usable.)
#13 14.42 debconf: falling back to frontend: Readline
#13 14.42 debconf: unable to initialize frontend: Readline
#13 14.42 debconf: (Can't locate Term/ReadLine.pm in @INC (you may need to install the Term::ReadLine module) (@INC entries checked: /etc/perl /usr/local/lib/aarch64-linux-gnu/perl/5.40.1 /usr/local/share/perl/5.40.1 /usr/lib/aarch64-linux-gnu/perl5/5.40 /usr/share/perl5 /usr/lib/aarch64-linux-gnu/perl-base /usr/lib/aarch64-linux-gnu/perl/5.40 /usr/share/perl/5.40 /usr/local/lib/site_perl) at /usr/share/perl5/Debconf/FrontEnd/Readline.pm line 8.)
#13 14.42 debconf: falling back to frontend: Teletype
#13 14.42 debconf: unable to initialize frontend: Teletype
#13 14.42 debconf: (This frontend requires a controlling tty.)
#13 14.42 debconf: falling back to frontend: Noninteractive
#13 14.86 Updating certificates in /etc/ssl/certs...
#13 15.11 rehash: warning: skipping ca-certificates.crt, it does not contain exactly one certificate or CRL
#13 15.11 0 added, 2 removed; done.
#13 15.12 Processing triggers for libc-bin (2.41-12+deb13u4) ...
#13 15.14 Processing triggers for ca-certificates (20250419+deb13u1) ...
#13 15.15 Updating certificates in /etc/ssl/certs...
#13 15.30 0 added, 0 removed; done.
#13 15.30 Running hooks in /etc/ca-certificates/update.d...
#13 15.30 done.
#13 15.31 Reading package lists...
#13 15.59 Building dependency tree...
#13 15.66 Reading state information...
#13 15.76 The following additional packages will be installed:
#13 15.76   libjemalloc2 liblua5.4-0 libopentracing-c-wrapper0t64 libopentracing1
#13 15.76 Suggested packages:
#13 15.76   vim-haproxy haproxy-doc
#13 15.78 The following NEW packages will be installed:
#13 15.78   haproxy libjemalloc2 liblua5.4-0 libopentracing-c-wrapper0t64
#13 15.78   libopentracing1
#13 16.28 0 upgraded, 5 newly installed, 0 to remove and 0 not upgraded.
#13 16.28 Need to get 2931 kB of archives.
#13 16.28 After this operation, 7673 kB of additional disk space will be used.
#13 16.28 Get:1 http://deb.debian.org/debian trixie/main arm64 libjemalloc2 arm64 5.3.0-3 [216 kB]
#13 16.51 Get:2 http://deb.debian.org/debian trixie/main arm64 liblua5.4-0 arm64 5.4.7-1+b2 [134 kB]
#13 16.76 Get:3 http://deb.debian.org/debian trixie/main arm64 libopentracing1 arm64 1.6.0-4+b2 [50.0 kB]
#13 17.02 Get:4 http://deb.debian.org/debian trixie/main arm64 libopentracing-c-wrapper0t64 arm64 1.1.3-3.1+b1 [28.3 kB]
#13 17.83 Get:5 http://deb.debian.org/debian-security trixie-security/main arm64 haproxy arm64 3.0.11-1+deb13u4 [2502 kB]
#13 17.89 debconf: unable to initialize frontend: Dialog
#13 17.89 debconf: (TERM is not set, so the dialog frontend is not usable.)
#13 17.89 debconf: falling back to frontend: Readline
#13 17.89 debconf: unable to initialize frontend: Readline
#13 17.89 debconf: (Can't locate Term/ReadLine.pm in @INC (you may need to install the Term::ReadLine module) (@INC entries checked: /etc/perl /usr/local/lib/aarch64-linux-gnu/perl/5.40.1 /usr/local/share/perl/5.40.1 /usr/lib/aarch64-linux-gnu/perl5/5.40 /usr/share/perl5 /usr/lib/aarch64-linux-gnu/perl-base /usr/lib/aarch64-linux-gnu/perl/5.40 /usr/share/perl/5.40 /usr/local/lib/site_perl) at /usr/share/perl5/Debconf/FrontEnd/Readline.pm line 8, <STDIN> line 5.)
#13 17.89 debconf: falling back to frontend: Teletype
#13 17.89 debconf: unable to initialize frontend: Teletype
#13 17.89 debconf: (This frontend requires a controlling tty.)
#13 17.89 debconf: falling back to frontend: Noninteractive
#13 18.20 Fetched 2931 kB in 2s (1430 kB/s)
#13 18.21 Selecting previously unselected package libjemalloc2:arm64.
#13 18.21 (Reading database ... 
(Reading database ... 5%
(Reading database ... 10%
(Reading database ... 15%
(Reading database ... 20%
(Reading database ... 25%
(Reading database ... 30%
(Reading database ... 35%
(Reading database ... 40%
(Reading database ... 45%
(Reading database ... 50%
(Reading database ... 55%
(Reading database ... 60%
(Reading database ... 65%
(Reading database ... 70%
(Reading database ... 75%
(Reading database ... 80%
(Reading database ... 85%
(Reading database ... 90%
(Reading database ... 95%
(Reading database ... 100%
(Reading database ... 5654 files and directories currently installed.)
#13 18.21 Preparing to unpack .../libjemalloc2_5.3.0-3_arm64.deb ...
#13 18.22 Unpacking libjemalloc2:arm64 (5.3.0-3) ...
#13 18.24 Selecting previously unselected package liblua5.4-0:arm64.
#13 18.24 Preparing to unpack .../liblua5.4-0_5.4.7-1+b2_arm64.deb ...
#13 18.24 Unpacking liblua5.4-0:arm64 (5.4.7-1+b2) ...
#13 18.25 Selecting previously unselected package libopentracing1:arm64.
#13 18.25 Preparing to unpack .../libopentracing1_1.6.0-4+b2_arm64.deb ...
#13 18.26 Unpacking libopentracing1:arm64 (1.6.0-4+b2) ...
#13 18.27 Selecting previously unselected package libopentracing-c-wrapper0t64:arm64.
#13 18.27 Preparing to unpack .../libopentracing-c-wrapper0t64_1.1.3-3.1+b1_arm64.deb ...
#13 18.27 Unpacking libopentracing-c-wrapper0t64:arm64 (1.1.3-3.1+b1) ...
#13 18.28 Selecting previously unselected package haproxy.
#13 18.28 Preparing to unpack .../haproxy_3.0.11-1+deb13u4_arm64.deb ...
#13 18.29 Unpacking haproxy (3.0.11-1+deb13u4) ...
#13 18.37 Setting up libjemalloc2:arm64 (5.3.0-3) ...
#13 18.37 Setting up liblua5.4-0:arm64 (5.4.7-1+b2) ...
#13 18.38 Setting up libopentracing1:arm64 (1.6.0-4+b2) ...
#13 18.38 Setting up libopentracing-c-wrapper0t64:arm64 (1.1.3-3.1+b1) ...
#13 18.38 Setting up haproxy (3.0.11-1+deb13u4) ...
#13 18.45 invoke-rc.d: could not determine current runlevel
#13 18.45 invoke-rc.d: policy-rc.d denied execution of start.
#13 18.49 Processing triggers for libc-bin (2.41-12+deb13u4) ...
#13 DONE 18.5s

#16 [runtime 3/9] RUN python -m pip uninstall -y pip setuptools
#16 0.702 Found existing installation: pip 26.2.1
#16 0.718 Uninstalling pip-26.2.1:
#16 0.806   Successfully uninstalled pip-26.2.1
#16 0.811 WARNING: Skipping setuptools as it is not installed.
#16 0.811 WARNING: Running pip as the 'root' user can result in broken permissions and conflicting behaviour with the system package manager, possibly rendering your system unusable. It is recommended to use a virtual environment instead: https://pip.pypa.io/warnings/venv. Use the --root-user-action option if you know what you are doing and want to suppress this warning.
#16 DONE 0.8s

#17 [runtime 4/9] RUN groupadd --system --gid 10001 messenger     && useradd --system --uid 10001 --gid messenger --no-create-home --shell /usr/sbin/nologin messenger
#17 0.114 useradd warning: messenger's uid 10001 is greater than SYS_UID_MAX 999
#17 DONE 0.1s

#18 [runtime 5/9] COPY --from=builder --chown=root:root /opt/venv /opt/venv
#18 DONE 0.5s

#19 [runtime 6/9] WORKDIR /app
#19 DONE 0.1s

#20 [runtime 7/9] COPY --chown=root:root alembic.ini ./
#20 DONE 0.0s

#21 [runtime 8/9] COPY --chown=root:root alembic ./alembic
#21 DONE 0.0s

#22 [runtime 9/9] COPY --chown=root:root scripts/secure_runtime.py /app/secure_runtime.py
#22 DONE 0.0s

#23 exporting to image
#23 exporting layers
#23 exporting layers 3.5s done
#23 exporting manifest sha256:a0036abaf1dc26192b52ff2c091022ceab20cc9cea9cd610455ad8b805893ceb done
#23 exporting config sha256:803afd2b81699b01569b340023bdb8ce3b04bbb5516bf4932104131ec2f4b887 done
#23 exporting attestation manifest sha256:0943882cb81d076bc7efc4801fa7d7a6fd440c72672848ec0e88cae548a655d5 done
#23 exporting manifest list sha256:f9ed609edabbcad8fd8fad7c8bd936dac23004c7b4b0b0d795ddf0741ae65dd6 done
#23 naming to docker.io/library/mtusi-messenger:mtusi2026lab7 done
#23 unpacking to docker.io/library/mtusi-messenger:mtusi2026lab7
#23 unpacking to docker.io/library/mtusi-messenger:mtusi2026lab7 0.8s done
#23 DONE 4.3s

#24 resolving provenance for metadata file
#24 DONE 0.0s
 api  Built
