Commit Graph
11 Commits
Author SHA1 Message Date
Artyom 3402fd69d4 Expose bounded seed progress for long reconciler experiments 2026-11-06 02:32:19 +03:00
Artyom 827b783be3 Reject disturbed reconciler measurements and preserve every series 2026-11-06 02:29:53 +03:00
ArtyomandClaude Opus 5.5 61dcb6bf13 Keep the audit journal of each reconciler pass in its report
The driver now stores the audit events a pass writes to stderr next to
its JSON report, and the apply check requires one
audit.attachment_discarded reason=reconcile for every injected stale
intent.

Co-Authored-By: Claude Opus 5.5 (1M context) <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01V1d3RLHNBBMA6UqBLLJv27
2026-10-30 09:09:15 +03:00
ArtyomandClaude Opus 5.5 21937f920f Wait for S3 to turn healthy after the paused pass
docker compose up --wait failed at once after unpausing S3: the probes
that ran while it was paused had already marked it unhealthy. The demo
now polls the health status of the container until it is healthy again.

Co-Authored-By: Claude Opus 5.5 (1M context) <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01V1d3RLHNBBMA6UqBLLJv27
2026-10-30 09:04:09 +03:00
ArtyomandClaude Opus 5.5 f1ee385a1b Tie the track tooling to keys, sets and a clean series
reconcile-inject.sh wrote an orphan under a key whose uuid differed
from the id it printed, so the demo could only compare counts; it now
uses one uuid for both, and the dry-run check compares the found and
the injected sets per class. The heal step returns the original bytes
under one quarantined key and random bytes of the same length under
another, and checks that only the first leaves the quarantine. The
load phase sums rechecked over its passes, and a new step stops a pass
hanging on a paused S3 with docker stop and checks exit code 143 within
seconds and a free lock afterwards.

reconcile_track.py cost clears the run files of the previous series and
measures 1k, 10k, 30k and 100k with --deep everywhere. The scenarios
record date, commit and docker inspect of the replicas or of S3 at the
moment they are down. make load-evidence and make clean-clone-evidence
rerun the message load and the clean clone block with raw output, and
make upload-memory passes ARGS to reproduce the run directories.

Co-Authored-By: Claude Opus 5.5 (1M context) <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01V1d3RLHNBBMA6UqBLLJv27
2026-10-30 09:01:39 +03:00
ArtyomandClaude Opus 5.5 2891b37e75 Split the S3 keys of the API and the reconciler, drop root from one-offs
The API key now has only GetObject, PutObject and DeleteObject on the
attachment objects: the server never lists the bucket, never runs
multipart uploads and has its region set. The reconciler gets its own
user messenger-reconciler with ListBucket, GetObject and DeleteObject,
created by s3-init from a secret of its own, so the API replicas can no
longer list the bucket. The cost seeding writes objects and therefore
runs in a one-off API container under the API key. s3-check proves the
API key cannot list and checks the reconciler key; its snapshot drops
dated fields with a JSON filter instead of grep, which left a dangling
comma, and its first line carries the date and the commit.

s3-init and s3-cli run as uid 65534, and migrate and reconciler get an
init process, so SIGTERM reaches python and docker stop ends a pass in
a fraction of a second instead of waiting for SIGKILL. limits.py and CI
check the users of the one-off services. Stack tests move a 3 MiB file
up and down through the balancer at 256 and 192 KiB/s, longer than the
request timeout, and check 401 before the declared size.

Co-Authored-By: Claude Opus 5.5 (1M context) <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01V1d3RLHNBBMA6UqBLLJv27
2026-10-30 08:53:39 +03:00
ArtyomandClaude Opus 5.5 8cb5a664c6 Keep the start allowance and retries in the cost summary
The edit that added them to the plan of the series missed after the
formatter split the line, so summary.json of df345b3 lists only the two
thresholds; that series ran with the defaults of b191623 (1.5 and 0.5
core-s, three retries). The summary of the next series records them.

Co-Authored-By: Claude Opus 5.5 (1M context) <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01V1d3RLHNBBMA6UqBLLJv27
2026-10-30 06:55:50 +03:00
ArtyomandClaude Opus 5.5 5c3c238d17 Screen the cost runs for foreign load and check a pass without S3
The cost matrix shares the Docker VM with the stands and builds of other
labs. Each run now reads the VM-wide /proc/stat and the cpu.stat of the
s3 and postgres cgroups before and after the pass, and the reconciler
reports its own CPU time. Foreign CPU over the window is the busy time
minus ours minus the cost of starting a container (1.5 core-s in the VM
and 0.5 on the pinned cores, measured on the idle stand). A run with
more than 2 foreign cores in the VM or 0.25 on the pinned cores goes to
cost/disturbed and is repeated after 15 s of quiet, up to three times;
docker stats of the whole host are saved before and after the series.

The demo also runs a pass with s3 stopped: it must exit with code 1 in
bounded time, log reconcile.failed and leave PostgreSQL and the bucket
as they were.

Co-Authored-By: Claude Opus 5.5 (1M context) <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01V1d3RLHNBBMA6UqBLLJv27
2026-10-30 06:35:59 +03:00
ArtyomandClaude Opus 5.5 5ca2cdc9af Measure the pass cost up to 30k objects
Filling RustFS 1.0.4 to 100k objects under one prefix did not finish in
two attempts: a write gets slower as the prefix grows (about 8 ms in an
empty prefix against 32 ms at 28k objects, 13 writes per second with 16
parallel writers), with enough memory and no background scanner load.
The cost matrix now stops at 30k objects with four parallel writers,
which still spans a factor of 30 for the linearity check; the design
and the spec of the change say so, and both aborted attempts with their
1k and 10k points and the diagnosis are kept in
evidence/reconcile/cost-aborted.

Co-Authored-By: Claude Opus 5.5 (1M context) <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01V1d3RLHNBBMA6UqBLLJv27
2026-10-29 04:40:24 +03:00
ArtyomandClaude Opus 5.5 de9dc61ebc Give RustFS room for the 100k point of the cost matrix
The first cost run stalled while filling the bucket to 100k objects:
RustFS keeps object metadata in memory, at about 45k objects it hit
its 1 GiB limit, the cgroup kept reclaiming and PutObject slowed from
about 240 to 11 objects per second. The S3 CPU limit is now taken from
S3_CPUS (default 1, as before), and the cost run gives RustFS 2 pinned
CPUs and 3 GiB for every point, so all N are measured with the same
limits; seeding uses 16 parallel writes.

Co-Authored-By: Claude Opus 5.5 (1M context) <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01V1d3RLHNBBMA6UqBLLJv27
2026-10-29 03:50:30 +03:00
ArtyomandClaude Opus 5.5 a335f654ed Add the track 2 fault injection, invariant check and experiment driver
reconcile-inject.sh and reconcile_check.py come from the prepared kit:
the first breaks either side on purpose (an object without a row, a
removed object, another size, the same size with other bytes, an old
intent with and without its object), the second is an oracle outside
the API that classifies every row and object from psql and rc, hashes
objects with --deep and reports ready attachments lost against a saved
set.

reconcile_track.py demo uploads through the balancer, links some
attachments to messages, injects each class on both sides with old and
fresh variants, and checks that a deep dry-run finds exactly what was
injected and changes nothing, that apply fixes exactly that and a
second apply does nothing, that broken rows and their message links
survive in quarantine with metadata 200 and content 404, that a
restored object heals, that a second pass is skipped while the lock is
held, and that passes in a loop during 75 s of uploads lose nothing.
Intents are injected 300 s old, between the reconciler grace and the
API sweep grace, so only the reconciler removes them.

reconcile_track.py cost snapshots docker stats of the whole host, pins
S3, PostgreSQL and the reconciler to their own CPUs, fills the stand to
each N with seed_storage.py run in the API image (parallel PutObject and
COPY), and records three dry runs per N and mode with a median table.

Co-Authored-By: Claude Opus 5.5 (1M context) <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01V1d3RLHNBBMA6UqBLLJv27
2026-10-29 03:23:59 +03:00